Dulon Teak Protector 43 – impregnator & UV-blocker

Name: Dulon Teak Protector 43 - impregnator &amp; UV-blocker
SKU: 6-43
Availability: InStock

€31.54 – €1,166.71

Phase 3 of the 3-STEP TEAK CARE SYSTEM

A revolutionary protection product with UV-blocker used on teak (decks) or furniture. It slows down the process of colouring/greying, prevents lime scale and algal growth. It provides protection during the whole sailing season. It creates a water- and dirt proof coating and does not become greasy or slippery.

Protects teak during the sailing season.
Delays greying due to UV blocker.
Creates invisible water and dirt repellent layer.
Prevents limescale and / or algae growth.
Does not get slippery or slippery.

Article Numbers / Packaging

Clear

SKU: 6-43 Category: Teak care Tag: 43

Additional information
Instructions

Additional information

Article Numbers / Packaging	6-43005 \| 0.5L, 6-43050 \| 5L, 6-43250 \| 25L
Available content	0.5L, 5L, 25L
Tips & Tricks	-Also ideal to treat wooden garden furniture.
C.R.P. indicator	Protect
Storage & Use	-DULON TEAK PROTECOR (0.5L) treats approximately 10m2. -Store frost-free, in a dark and dry place . -Apply above 0 degree C. -Do not use in direct sun light.

PRETREATMENT (if required)

Use DULON TEAK DEGREASER 41 to remove stains of (winch)grease, (suntan)oils, diesel- and fuel spatters, etc.
Use DULON TEAK CLEAN & BRIGHTENER 42 to restore weathering, greying, algae growth and to remove lime scale, green fur etc.

PROTECTING

Surface should be clean and oil- and grease free.

— SHAKE BEFORE USE —

Apply DULON TEAK PROTECTOR 43 pure, steady and frugal on to the surface using a flat brush or paint roller.
Avoid sheets and drops, remove extensive fluid using cloth or paper.
Drying time aprox. 20-30 minutes.

DULON TEAK PROTECTOR 43 will be complete impregnated and activated after at least 24 hours (during this period do not charge with oil or water).

Dulon Teak Protector 43 – impregnator & UV-blocker

Additional information

Related products